Wednesday, January 5. 2011
A new year, a newly formed building ... Posted by Susanne Ruthven
in house at
08:37
Comments (0) Trackbacks (0) A new year, a newly formed building platform
It's an exciting start to the New Year for us, with our newly formed building platform, thanks to our earthworks starting just before Christmas.
So far this part of the build has taught us first-hand why having a contingency fund is so important when embarking on earthworks in preparation for a house-build. It started with our engineer completing further geo-technical assessments of our land. That assessment came back slightly differently than expected, which meant that the cut and batter of the bank was slightly different than the original plan. As a consequence, our build platform is smaller than we first expected it to be. Unfortunately this has had a knock-on effect. One corner of our house now has to be built right on the edge of the receding bank, which means that corner will now need to have its foundations specifically designed by an engineer. <Cha-ching> With the house positioned there, we now won't be able to walk around that corner of the house, which decreases the amount of usable land we'll have. Not a problem, we thought. We'll just whack some of the dirt we're cutting away down the bank to extend the platform out the front of the site. After some discussion with engineers, surveyors and our site foreman, it turns out we'll need to build a landscaping fence to do that, which our engineer will need to design. <Cha-ching> As the cut progressed, our engineer determined that there are two segments of the bank that are highly fractured, which he recommends we install some steel meshing to the area, or build a timber fence in front of the bank. <Cha-ching> We were expecting our building consent to be granted before Christmas, but as with everything to do with the build, it too has been delayed. Our section is zoned for Specific Engineer Design wind zone, which doesn't necessarily mean that it's windier than anywhere else in Wellington. It just means that the Council hasn't yet tested that area, so an engineer needed to determine the wind speed for our site, taking into account various factors, such as topography of the land, the direction the site faces, etc. Our wind loading is 53m/s, which is 2m/s more than the category 'Very High Wind Zone', placing our section in the highest wind zoning. To cut a long story short, we now need extra bracing, extra trusses, extra strapping, extra studs, and, you guessed it, extra engineering, particularly regular site inspections during the build. <Cha-ching cha-ching> So, we enter 2011 behind schedule, with quite a bit less contingency money and nothing really to show for our spending of it. But, ah well, that's what building is all about. Wednesday, December 8. 2010LCA2011 - We're going!
Awesome. I've just registered for lca2011, it looks to be an awesome conference! They have a great line up of speakers, some amazing venues (I know, I've seen some of them already), and a fantastic group of people in one place. The reason that I've already seen some of the venues is that Susanne and I attended the ghosts weekend that the lca2011 Ninjas held earlier in the year. During the ghosts weekend the current organising team bring a number of previous organisers, some people from Linux Australia and their team into one place, lock them in a room and absorb as much information as they possibly can. They bombard us with questions, they tease out tidbits of knowledge and in exchange for that they let us into a few of their secrets and show us around. Admittedly they show us around and then interrogate us on what we think of them. That was my first time in Brisbane, and an overnight stay is no where near long enough. I'm looking forward to spending a week in Brisbane, and hopefully getting a chance to take in a bit more of the city. As much of a chance as you get when attending a conference that is though... Monday, November 29. 2010And so it begins...
We've spent the last 6 weeks impatiently waiting for this day, and finally, the day has come! Today is the day the earthworks began. Yippeeeeee!!!!
The earthworks had to wait until the weather improved and being Wellington, that was waiting until after Labour weekend. Then there was a process of putting some of the work out for tender, receiving the tenders, and decided one of the contractors for the job, which took some time and a bit of negotiation. The big digger arrived onsite today. It dwarfs the bank it's cutting down, which is reassuring. It'll take one week to get the site prepared, including mulching the vegetation and setting up sediment control measures to ensure that the nearby waterways aren't polluted from the dust emissions. The health and safety officer hooked us up with some safety gear so that we could go out onsite regularly. Tomorrow, our surveyor will set out the site, which means he will peg out where the digger should be cutting into the bank. After that our engineer will come to complete what we hope will be the final soil testing on our site. But first the digger will need to create a path for our engineer to be able to access the top of the bank. So in about two weeks time, our section will be transformed. We won't even recognise it. How super dooper exciting! After 7 or so years, it's finally happening, woohoo!! In the meantime, we've applied for building consent, which should be granted any day now. Fingers crossed it will come through before the earthworks have finished so that it doesn't delay the build. If granted, it will be on the condition that the Engineer certifies our foundation design, which he can't do until after he's seen what the earthworks uncovers. While we were waiting for the weather to improve, we met with the electrician. Despite having set aside over $2,500 more than the PC Sum for electrical work, we still came in $2,000 over budget. Yikes! So we've made the most of the sales and now have a wardrobe full of lights and 2 bathroom heaters. The search is on for the cheapest decent heated towel rails. While we were shopping, we stumbled across a swing set that a shop used to entertain it's customers children. Naturally, our children loved it. So we took the liberty of asking if we could buy it. Turns out we could, at a very competitive rate. So we are now proud owners of 2 swings and some monkey bars. Who needs a security system anyway. They are so over-rated. Besides, the children's swings are much more important. Thursday, October 7. 2010Progress at last!
Good news! The Council has granted our resource consent.
After getting partway through the consultation process with local Māori, we found out that the Council were wrong about our section being of cultural significance. After completing some research on Google, we found the Council's District Plan, which listed Puketirotiro Peak as being of cultural significance. Puketirotiro peak is a nearby lookout point. The important words on this plan are that the property of cultural significance is "identified by a trig station." Our surveyor took a look around, and found the trig station, which is located at 157 Maungaraki Road. Our property is at 251 Maungaraki Road. The council then told us that we no longer needed to consult with Māori. Phew! One less thing to do. Now all we need to do is wait until this weather improves for a decent period of time so that the earth dries out and the earthworks can begin. We thought that might be in a couple of weeks or so, but we've been told that, in reality, it's more likely to be late November. Yikes! Ah well, another month, another delay to the move-in date. We're now looking at moving in to the house in late April 2011. The same day that the Council granted our resource consent, we received our working drawings, yippee!! All in all they look fantastic! There are just a few minor errors, which comes with the territory. But thankfully we asked to see the working drawings before they were lodged with the Council with our application for building consent, so those things are getting fixed up as we speak. We should be able to lodge our building consent application within the next week or so. Next on the agenda is meeting with the electrician to decide lighting, power outlets, etc. That's the last major thing we need to do before the build begins. Exciting stuff!! On a completely different note, Andrew and I have been nominated for an award in the New Zealand Open Source Awards for being Open Source Advocates in our role of Co-Directors of linux.conf.au 2010, which was held in Wellington earlier this year. It's quite touching to have the hard work we put in organising linux.conf.au 2010 recognised by someone out there as being so significant that they actually took the time and energy to nominate us. Little old us! Ah, shucks Sunday, September 12. 2010The frustration of building
We've come to understand that the stress involved with building is not actually stress. It's frustration.
We've learnt that our section is zoned for specific design wind zone. This means our roof trusses need to be specifically designed by an engineer taking into account the wind on the site. The frustrating part: Instead of taking 2-3 weeks to be completed, our working drawings have so far taken 5 weeks. And they still aren't finished yet. We're learnt that our section is of cultural significance. This means that we need to consult with Māori about the earthworks we plan to complete on our site. The frustrating part: Instead of the Council granting our consent within 20 working days, it won't be granted until we've consulted with Māori we understand this will take about a month. The even more frustrating part: The Council only told us this on Working Day 23. We've chosen the flooring for the house, which was very exciting and is making the build seem more 'real'. We were prompted to buy the flooring before the end of August to avoid missing out on the 40% discount offered. Only to find, 6 days later, a brochure in the mail advertising a 50% discount from the same carpet company. Frustrating! On the bright side, we've chosen all of the colours for the house. We can now picture what the house will look like, and just can't wait till the house is built. The frustrating thing is that all of the issues we've had this month have delayed the build itself. Which means we won't be in the house until mid-late March at best. Sigh. Saturday, August 14. 2010
Engineering, love it or hate it, ... Posted by Susanne Ruthven
in house at
08:39
Comments (0) Trackbacks (0) Engineering, love it or hate it, it's necessary.
The resource consent application has finally been lodged with the council after many delays. One of which being the engineering.
Our engineer had already completed a Geotech assessment of the site, which consisted of digger pits, scala penetrometer testing and the like. The engineering came back as the bank being stable enough to build within certain parameters. However, the earthworks plan, prepared by the surveyor, changes the building platform. The knock-on effect was that our engineer had to modify his original report to reflect the earthworks plan, before we could lodge the resource consent application with the Council. Now that the earthworks plan has been drawn up and we know exactly where the house will be sited, the engineer needs to complete some more testing of our building platform before we can start the earthworks. Unfortunately the testing will only give him an indication of what the land will be like once the earthworks have been completed. So the engineer will need to be on site when the earthworks happens. The unfortunate thing about all of this, is that all these things need to happen before our engineer will sign off on the house foundations. The upshot is that, only after the earthworks have been completed, will we know whether we need specific design foundations, a retaining wall or a stock standard concrete slab. The downside, of course, is that it pushes the build project out further, because we can't apply for building consent, until we know what foundations we need and until we have the engineer's big tick. This makes us a touch nervous, having paid our deposit for the house and signed the build contract with our design and build company. But then, what is contingency money for? Worse case scenario we'll need some specific design foundations or a retaining wall. Being ever optimists, we're trucking along with the house plans. This week we finalised our kitchen plans. I can't wait until we can cook in it. We're meeting with a flooring company next weekend, and a colour consultant this week to decide all things colour related. And my goodness there are a lot of things to choose colours for: Garage door, front door, back door, walls, ceilings, hard wood areas, window frames, glass tints, roofing tiles, downpipes, kitchen cabinetry, benchtop. Ooh, yay, what fun!!! Saturday, July 24. 2010The HillstoneIt takes many people to get a project like building a house off the ground. We've been in contact daily with our surveyor, resource consent planner, engineer, designer, and more recently mortgage broker and valuer. After having had a frustrating few weeks, we are now, finally, making progress. We now have a earthworks plan that will create the optimum space on the site. The site will be excavated so that the house will have a North North West outlook, which in Wellington, is the best angle for optimum sunlight. The best part about the earthworks plan is that we can now build using a concrete slab, which is much cheaper than having to build on piles or any other engineered foundations. So we have now finalised our resource consent for the earthworks, which is ready to be lodged with the Council on Monday. We've heard back from a number of suppliers this week who have firmed up their quotes for us. The best one being from our digger driver, who has been very generous with his pricing. So now that we know how much money we have left in the kitty and the site dimensions, we've been having fun deciding which house plan we'd like to build. The Hillstone This week's big milestone: Paying the deposit and proceeding to working drawings. So exciting, so surreal. After all this time we're actually building our house. Yippee!!! Thursday, July 15. 2010
Two Steps Forward. One Step Back Posted by Susanne Ruthven
in house at
11:49
Comment (1) Trackbacks (0) Two Steps Forward. One Step BackSince my last blog, we've learnt that building a house quickly turns from fun into frustration. After getting confirmation from the Design and Build company, 3 times, that the indicative pricing for the house fits our budget, we handed the plans to our valuer to check that, after the house has been built, it would provide us with 75% equity. Luckily for us it came back as providing 74.5% equity. Phew! The bank is happy so we are happy. Then the Design and Build company we were using (note the use of past tense), gave us 2 prices for the same plan which greatly varied from the original price, despite no changes to the plan. When queried, they told us they made a mistake with the first pricing. Although that doesn't explain the $8,000 variance between the second and third pricing, which they had no explanation for. Despite the house now being $18,000 over our budget, they suggested we pay to get working drawings anyway. But really, what would be the point in that?!? So after going round and round in circles and banging our heads against a brick wall a few times, we've jumped ship. We're now using Jennian Homes, who have been wonderful and marvelous in every way... so far, and better still hasn't varied their quotes in the slightest. So now we have some plans we like, we need to sort out the building platform. Some months ago, we lodged a resource consent application to take earth from the bank on our site and use it to fill a hole on a different site nearby. After waiting 6 months for Maori to consult on whether or not that hole should be filled, the Council in their great wisdom decided to reject the resource consent application. They have asked us to instead submit two resource consents: One for our site; one for the other site. Muttermumblegrumble red tape muttermumble sigh. In the meantime, we received our Engineer's report. Being solid rock, the bank is currently graded at a 15 degree angle. When we bought the site, we spoke to the engineer who originally determined the grading of the rock at 15 degrees. He said that we could take the bank back at the same gradient. Since then someone has put some loose soil at the top of the bank and over our boundary on to our land. At the time we discovered it, we didn't think it would matter much. Turns out it does matter. It means that instead of a 15 degree angle, we need to a gradient of 30 degrees. The upshot is, we aren't allowed to remove as much dirt as we were able to, plus we cannot build within 2m of the toe of the bank, making the building platform smaller than expected. Consequence: the chosen house design doesn't fit the site anymore. Argh! Back to the drawing board. So after chasing our tails some more and shaving a few yaks on the way, the man with a hole to fill has taken charge. Being a developer and a surveyor, he's working with the engineer to devise an earthworks plan which will allow us to have the optimum amount of space on our building platform. Once we have their topography map of what the site will look like after the earthworks have been completed, we can then choose a house plan to suit the site. We then need to amend the resource consent to have the footprint of this house on the land, which we'd better do quick smart because the amended resource consent application is due back at the Council by the end of this week. Where does that leave us? Pretty much in exactly the same position we were in a month ago. No resource consent. No plans. No working drawings. We even need to get the valuer to value the new plans. Sigh, two steps forward, one step back. Sunday, June 20. 2010
Beginning The Build Process Posted by Susanne Ruthven
in family, house at
09:35
Comment (1) Trackbacks (0) Beginning The Build ProcessSo Andrew and I have decided to finally build on the section we've owned since 2004. We don't tend to take decisions lightly. So in coming to this decision, over the years we've spoken to: 2 Architects, 3 Designers, 1 Draughtsman and 4 Design and Build Companies. Not to mention the hours of online research, visits to suppliers, reviewing pamphlets and checking out showhomes etc. I've also had hours upon hours of fun coming up with 30-odd designs using Inkscape - The BEST free and open source vector drawing software available. Having just spent 18 months project managing a major international 7 day conference, linux.conf.au 2010, we decided we would not project manage the house build. So, we've decided to go with a design and build company. We took their design and tweaked it (using Inkscape) to better suit our section, and came up with this: Now we have the design, it's time to work out how we're going to pay for it. Thanks to our mortgage broker, we're now pre-approved to value x. The Design and Build company has estimated the pricing as x minus $5,000. The only way to get the actual price is to draw up the working drawings, which of course costs money. So here's hoping the Design and Build company is accurate in their indicative pricing! So to help the build fit the budget, we've started looking into supplying some of the materials ourselves and getting in our own tradesmen...I find myself wondering, if something looks like project managing the build and smells like project managing the build, is it not project managing the build? Sigh. We may be in for a long 3 months (apparently the build will take only 3 months, but I will not hold my breath). A while back, we were lucky enough to be introduced to a man who owns a subdivision down the road from us, who happens to have a hole that he needs to fill. Conveniently, our section is made up of the kind of rock that fills holes in subdivisions. So naturally, we struck a deal and lodged an application for resource consent to complete some earthworks on the site. The Council should be granting the application any day now. So we've had to move fast on the build process so that we'll know what earthworks to do as soon as the application is granted. So to help us with the build so far, we have:
Next on the list, a surveyor, who will tell us the topography of the land. Saturday, May 29. 2010Geek ParentsThere have been many things about becoming parents that have surprised us. There are also been things from organising LCA2010 that have surprised us. One of the more surprising things that is that Susanne has become more of a geek. Not terribly surprising really, that after co-directing one of the ultimate geek conferences that you'd pick up a few things. Not only is Susanne now an expert Inkscape user, she is now at home hacking HTML, writing using LaTeX, posting on Twitter & identi.ca, using request tracking systems and last but not least IRC. IRC was vital to organising LCA, but Susanne and I have continued to use IRC now that LCA is over to chat while I'm at work, and as it turns out around the house. For example: <MadHatter> 16:10:54> Please pick up your son <MadHatter> 16:11:05> now please <MadHatter> 16:11:10> NOW please <MadHatter> 16:11:12> NOW <MadHatter> 16:11:18> NOW NOW NOW NOW NOW <MadHatter> 16:11:28> I'm on strike <MadHatter> 16:11:41> Andrew <MadHatter> 16:11:56> Andrew Graeme Ruthven! <MadHatter> 16:12:10> Pick. Up. Your. Son <MadHatter> 16:12:13> Please <MadHatter> 16:12:19> Please! The funniest part was that, even though I was using my laptop, my IRC client wasn't running. My IRC proxy was happily logging those requests, so when Susanne was cracking up with laughter (thinking I was ignoring her) I was able to catch up on what was happening... Sunday, January 3. 2010LCA2010 - Many MeetingsA typical LCA2010 meeting The photo here's a typical LCA2010 organising meeting. The scones aren't typical - they were made by Andrew & Heather's son Max, who you can see through the door (they were certainly appreciated, thanks Max!). We've been using the training room at Catalyst as a handy location in town that easy for people to get to, and tucked out of the way. Also not visible in the photo are Susanne and our son Adam, and Heather who's taking the photo. Saturday, January 2. 2010
LCA2010: On LinkedIn Posted by Andrew Ruthven
in catalyst, family at
04:08
Comments (0) Trackbacks (0) LCA2010: On LinkedIn
Attending LCA2010? Use LinkedIn?
How about showing you're attending on the LCA2010 event on LinkedIn! Sunday, September 20. 2009New Little PersonThe newest addition to the Ruthven family shot into this world with great gusto and enthusasim on Thursday morning. Dad was in great shock at being woken up at 2:20 am, when contractions began, then a mere 2 hours later at 4:32 holding his son - Adam Ruthven. Mum was in even greater shock at arriving at the hospital to be told that she was ready to push! Mum & Dad are both incredibly proud of Adam, weighing in at 3.6kg (7lb 15oz). Dad & Brooke brought Mum & Adam home on Friday morning, where we've had to readjust to once again having sleep deprivation. Brooke is thoroughly enjoying having a baby brother. She is being a perfect big sister, helping us care for Adam, even helping with nappy changes! (We're hopeful this will continue...) Thursday, September 17. 2009
LCA2010 - Schedule Released and ... Posted by Andrew Ruthven
in catalyst, family at
10:28
Comment (1) Trackbacks (0) LCA2010 - Schedule Released and Recent Happenings
Wow, has it really been two months since the last blog post? No wonder, we've been flat out!
Saturday, July 25. 2009
LCA2010 - Call for Papers - deadline ... Posted by Andrew Ruthven
in catalyst, family at
07:26
Comments (0) Trackbacks (0) LCA2010 - Call for Papers - deadline extended!WELLINGTON, New Zealand – Friday 24 July 2009 – The LCA2010 Organising Committee have been overwhelmed by the numbers and quality of the papers submitted to linux.conf.au so far! The success of the papers so far has put us in a generous mood. So we've decided to give all you slackers out there an extension on the Call for Papers by one week! Call for Papers Now Closing: Friday 31 July 2009 at 17:00 NZST Remember, to increase your chances of acceptance, check out the Papers Info page on our website before submitting your paper. |
Calendar
ArchivesCategoriesSyndicate This BlogBlog AdministrationShow tagged entriesPowered by |